FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2)

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2)

Last updated: January 18, 2010

GPIB Command Conventions

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):BURSt:ALL?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the block error measurement results for all the bursts on Carrier 2. The total integrity indicator and the block error ratio for burst 1 to 8 are returned. Note, the block error ratio for burst 6, 7 and 8 are always NAN. .

This query can only be used when the BLER measurement method is Polling. See Block Error Measurement for more information about the BLER measurement methods.

Query

Integrity indicator:

Block error ratio:

  • Range: 0 to 100 and 9.91 E+37 (NAN)
  • Resolution: 0.01
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above
Programming Example
OUTPUT 714;"FETC:BLER:PDTC2:BURS:ALL?"

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):BURSt<[1]|2|3|4|5>[:ALL]?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the block error measurement results of Carrier 2 by time slot. The integrity indicator, blocks tested, block error ratio, and block error count are returned.

This query can only be used when the BLER measurement method is Polling. See Block Error Measurement for more information about the BLER measurement methods.

Query

Integrity indicator:

Blocks tested:

  • Range: 0 to 99127 and 9.91 E+37 (NAN)
  • Resolution: 1

Block error ratio:

  • Range: 0 to 100 and 9.91 E+37 (NAN)
  • Resolution: 0.01

Block error count:

  • Range: 0 to 99127 and 9.91 E+37 (NAN)
  • Resolution: 1
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above
Programming Example
OUTPUT 714;"FETC:BLER:PDTC2:BURS?" ! Query results for the first burst.
OUTPUT 714;"FETC:BLER:PDTC2:BURS2?" ! Query results for the second burst.
OUTPUT 714;"FETC:BLER:PDTC2:BURS3?" ! Query results for the third burst.
OUTPUT 714;"FETC:BLER:PDTC2:BURS4?" ! Query results for the fourth burst.

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir1[:ALL]?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the total block error measurement results for the PDCH pair 1 on Carrier 2. The integrity indicator, blocks tested, block error ratio, and block error count are returned.

Query

Integrity indicator:

Blocks tested:

  • Range: 0 to 99127 and 9.91 E+37 (NAN)
  • Resolution: 1

Block error ratio:

  • Range: 0 to 100 and 9.91 E+37 (NAN)
  • Resolution: 0.01

Block error count:

  • Range: 0 to 99127 and 9.91 E+37 (NAN)
  • Resolution: 1
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir2[:ALL]?

Function

 GSM TA

This command is not applicable to GSM TA.

GPRS TA

This command is not applicable to GPRS TA.

EGPRS TA

This command is not applicable to EGPRS TA.

GSM/GPRS LA

This command is not applicable to GSM/GPRS LA.

EGPRS LA

This query returns the total block error measurement results for the PDCH pair 2 on Carrier 2. The integrity indicator, blocks tested, block error ratio, and block error count are returned.

Query

Integrity indicator:

Blocks tested:

  • Range: 0 to 99127 and 9.91 E+37 (NAN)
  • Resolution: 1

Block error ratio:

  • Range: 0 to 100 and 9.91 E+37 (NAN)
  • Resolution: 0.01

Block error count:

  • Range: 0 to 99127 and 9.91 E+37 (NAN)
  • Resolution: 1
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir1:BLOCks?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the total number of information blocks tested during the last block error measurement for the PDCH pair 1 on Carrier 2.

Query

Range: 0 to 99127 and 9.91 E+37 (NAN)

Resolution: 1
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir2:BLOCks?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the total number of information blocks tested during the last block error measurement for the PDCH pair 2 on Carrier 2.

Query

Range: 0 to 99127 and 9.91 E+37 (NAN)

Resolution: 1
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir1:COUnt?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the count of erroneous blocks found for PDCH pair 1 on Carrier 2 during the last block error measurement.

Query

Range: 0 to 99127 and 9.91 E+37 (NAN)

Resolution: 1
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir2:COUnt?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the count of erroneous blocks found for PDCH pair 2 on Carrier 2 during the last block error measurement.

Query

Range: 0 to 99127 and 9.91 E+37 (NAN)

Resolution: 1
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir1:RATio?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the ratio of erroneous blocks found for PDCH pair 1 on Carrier 2 during the last block error measurement.

Query

Range: 0 to 100 and 9.91 E+37 (NAN)

Resolution: 0.01
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above

FETCh:BLERror:(PDTC2|PDTCH2|PDTChannel2):PPAir2:RATio?

Function

 GSM TA

This command is not applicable to GSM Test Application.

GPRS TA

This command is not applicable to GPRS Test Application.

EGPRS TA

This command is not applicable to EGPRS Test Application.

GSM/GPRS LA

This command is not applicable to GSM/GPRS Lab Application.

EGPRS LA

This query returns the ratio of erroneous blocks found for PDCH pair 2 on Carrier 2 during the last block error measurement.

Query

Range: 0 to 100 and 9.91 E+37 (NAN)

Resolution: 0.01
Requirements GSM/GPRS/ EGPRS LA

Revision H.00.00 and above