FETCh:EMACcuracy

FETCh:EMACcuracy

Last updated: September 1, 2009

GPIB Command Conventions

FETCh:EMACcuracy[:ALL]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries integrity indicator, RMS error vector magnitude (EVM), peak EVM, 95th percentile EVM, frequency error, origin offset suppression, RMS phase error, RMS magnitude error, amplitude droop, IQ imbalance.

EGPRS LA

Query

Integrity indicator

RMS Error Vector Magnitude

  • Range: 0 % to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

Peak Error Vector Magnitude

  • Range: 0 % to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

95th Percentile Error Vector Magnitude

  • Range: 0 % to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

Frequency Error

  • Range: -9999 Hz to +9999 Hz and 9.91 E+37 (NAN)
  • Resolution: 0.01 Hz

Origin Offset Suppression

  • Range: -70 dB to 0 dB and 9.91 E+37 (NAN)
  • Resolution: 0.01 dB

RMS Phase Error

  • Range: 0 to 180 degrees and 9.91 E+37 (NAN)
  • Resolution: 0.01 degrees

Peak Phase Error

  • Range: 0 to 180 degrees and 9.91 E+37 (NAN)
  • Resolution: 0.01 degrees

RMS Magnitude Error

  • Range: 0 to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

Peak Magnitude Error

  • Range: 0 to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

Amplitude Droop

  • Range: -20 dB to +20 dB and 9.91 E+37 (NAN)
  • Resolution: 0.01 dB

IQ Imbalance

  • Range: -100 dB to 0 dB and 9.91 E+37 (NAN)
  • Resolution: 0.01 dB

AM-PM Timing Offset

  • Range: -5000ns to 5000ns and 9.91 E+37 (NAN)
  • Resolution: 1ns
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

Revision: A.11 and above adds AM-PM Timing Offset

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

Revision: G.01 and above adds AM-PM Timing Offset

Programming Example

 
OUTPUT 714;"FETCh:EMACcuracy:ALL?" 
! Returns all of the 8PSK Modulation Accuracy results.

FETCh:EMACcuracy:APOFfset[:AVERage]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average 8PSK AM-PM timing offset result from a multi-measurement.

EGPRS LA

Query

Range: -5000ns to 5000ns and 9.91 E+37 (NAN)

Resolution: 1ns

Requirements GSM/GPRS/
EGPRS TA

Revision: A.11 and above

GSM/GPRS/ EGPRS LA

Revision: G.01 and above

FETCh:EMACcuracy:APOFfset:MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum 8PSK AM-PM timing offset result from a multi-measurement.

EGPRS LA

Query

Range: -5000ns to 5000ns and 9.91 E+37 (NAN)

Resolution: 1ns

Requirements GSM/GPRS/
EGPRS TA

Revision: A.11 and above

GSM/GPRS/ EGPRS LA

Revision: G.01 and above

FETCh:EMACcuracy:APOFfset:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum 8PSK AM-PM timing offset result from a multi-measurement.

EGPRS LA

Query

Range: -5000ns to 5000ns and 9.91 E+37 (NAN)

Resolution: 1ns

Requirements GSM/GPRS/
EGPRS TA

Revision: A.11 and above

GSM/GPRS/ EGPRS LA

Revision: G.01 and above

FETCh:EMACcuracy:APOFfset:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from 8PSK AM-PM timing offset measurement.

EGPRS LA

Query

Range: 0 to 5000ns and 9.91 E+37 (NAN)

Resolution: 1ns

Requirements GSM/GPRS/
EGPRS TA

Revision: A.11 and above

GSM/GPRS/ EGPRS LA

Revision: G.01 and above

FETCh:EMACcuracy[:ALL]:ETSI?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the ETSI specified 8PSK multislot modulation accuracy results; integrity indicator, RMS error vector magnitude, peak error vector magnitude, 95th percentile, frequency error, and origin offset suppression.

EGPRS LA

Query

Integrity indicator

RMS Error Vector Magnitude

  • Range: 0 % to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

Peak Error Vector Magnitude

  • Range: 0 % to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

95th Percentile Error Vector Magnitude

  • Range: 0 % to 100 % and 9.91 E+37 (NAN)
  • Resolution: 0.01 %

Frequency Error

  • Range: -9999 Hz to +9999 Hz and 9.91 E+37 (NAN)
  • Resolution: 0.01 Hz

Origin Offset Suppression

  • Range: -70 dB to 0 dB and 9.91 E+37 (NAN)
  • Resolution: 0.01 dB
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

Programming Example

 
OUTPUT 714;"FETCH:PFERROR:ALL:ETSI?" 
! Returns the ETSI-specified 8PSK modulation accuracy results.

FETCh:EMACcuracy:DROop[:AVERage]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average amplitude droop result from a multi-measurement.

EGPRS LA

Query

Range: Range: -20 dB to +20 dB and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:DROop: MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum amplitude droop results from a multi-measurement.

EGPRS LA

Query

Range: -20 dB to +20 dB and 9.91 E+37 (NAN)
Resolution: 0.01 dB
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:DROop:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum amplitude droop results from a multi-measurement.

EGPRS LA

Query

Range: -20 dB to +20 dB and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:DROop:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from an amplitude droop multi-measurement.

EGPRS LA

Query

Range: -20 dB to +20 dB and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:PEAK[:AVERage]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average peak error vector magnitude result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:PEAK:MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum peak error vector magnitude result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:PEAK:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum peak error vector magnitude result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:PEAK:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from a peak error vector magnitude measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:PERCentile?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the 95th percentile error vector magnitude result.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:RMS[:MAXimum]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum RMS error vector magnitude result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:RMS:AVERage?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average RMS error vector magnitude result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:RMS:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum RMS error vector magnitude result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:RMS:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from an RMS error vector magnitude multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:EVM:TRACe:DATA?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the EGPRS Modulation Accuracy EVM measurement and returns 142 points representing the EVM results (in %) of the trace data. If the graph state is OFF, this query returns NAN. See SETup:EMACcuracy:GRAPh:STATe . When multi-measurements are turned on, this is the trace data for the last burst measured

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:FERRor:AVERage?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average frequency error result from a multi-measurement.

EGPRS LA

Query

Range: -9999 Hz to +9999 Hz and 9.91 E+37 (NAN)
Resolution: 0.01 Hz
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:FERRor: MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum frequency error result from a multi-measurement.

EGPRS LA

Query

Range: -9999 Hz to +9999 Hz and 9.91 E+37 (NAN)
Resolution: 0.01 Hz
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:FERRor:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum frequency error result from a multi-measurement.

EGPRS LA

Query

Range: -9999 Hz to +9999 Hz and 9.91 E+37 (NAN)
Resolution: 0.01 Hz
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:FERRor:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from a frequency error multi-measurement.

EGPRS LA

Query

Range: -500 kHz to +500 kHz and 9.91 E+37 (NAN)

Resolution: 0.01 Hz

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:FERRor[:WORSt]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the worst case frequency error result from a multi-measurement.

This is a signed quantity which returns the frequency error out of all the individual sub-measurements taken, which is furthest from 0 Hz. In the case where the most Positive and most negative frequency errors are the same, the positive one will be returned.

EGPRS LA

Query

Range: -500 kHz to +500 kHz and 9.91 E+37 (NAN)

Resolution: 0.01 Hz

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:HISTogram:DATA?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the EGPRS Modulation Accuracy Sample EVM Histogram measurement and returns 201 points representing a histogram of the EVM results for the measured burst or bursts. The last point returned is the number of samples whose EVM value exceeded the maximum value allowed by the histogram at its current resolution setting. (See SETup:EMACcuracy:HISTogram:MAXimum:EVM for more information.)

If the graph state is OFF, this query returns NAN. See SETup:EMACcuracy:GRAPh:STATe .

EGPRS LA

Query

Range:

  • 0 to 142 when the multi-measurement count is OFF or 0
  • 0 to 141858 when multi-measurements are used
  • -1 when there is no valid data to return

Resolution: 1

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:ICOunt?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the intermediate count of 8PSK modulation accuracy multi-measurements completed. This number will increase to the value returned by SETup:EMACcuracy:COUNt:NUMBer .

EGPRS LA

Query

Range: 0 to 999

Resolution: 1

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:IQIMbalance:MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum IQ amplitude imbalance result from a multi-measurement. The IQ Imbalance State must be turned on for this query to return a result other than NAN. See SETup:EMACcuracy:IQIMbalance[:CALCulate]:STATe .

EGPRS LA

Query

Range: -100 dB to 0 dB and 9.91 E+37 (NAN)
Resolution: 0.01 dB
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:IQIMbalance:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum IQ amplitude imbalance result from a multi-measurement. The IQ Imbalance State must be turned on for this query to return a result other than NAN. See SETup:EMACcuracy:IQIMbalance[:CALCulate]:STATe .

EGPRS LA

Query

Range: -100 dB to 0 dB and 9.91 E+37 (NAN)
Resolution: 0.01 dB
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:IQIMbalance[:AVERage]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average IQ imbalance result from a multi-measurement. The IQ Imbalance State must be turned on for this query to return a result other than NAN. See SETup:EMACcuracy:IQIMbalance[:CALCulate]:STATe .

EGPRS LA

Query

Range: -100 dB to 0 dB and 9.91 E+37 (NAN)
Resolution: 0.01 dB
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:IQIMbalance:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from an IQ amplitude imbalance multi-measurement.The IQ Imbalance State must be turned on for this query to return a result other than NAN. See SETup:EMACcuracy:IQIMbalance[:CALCulate]:STATe .

EGPRS LA

Query

Range: -20 dB to +20 dB and 9.91 E+37 (NAN)
Resolution: 0.01 dB
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:INTegrity?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the integrity indicator for the 8PSK multislot modulation accuracy measurement. Zero indicates a normal result.

See Integrity Indicator for descriptions of non-zero integrity indicators.

EGPRS LA

Query

Range: See Integrity Indicator .

Resolution: 1

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:PEAK:AVERage?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average peak magnitude error result from a multi-measurement.

EGPRS LA

Query

Range: -100% to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:PEAK:MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum peak magnitude error result from a multi-measurement.

EGPRS LA

Query

Range: -100 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:PEAK:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum peak magnitude error result from a multi-measurement.

EGPRS LA

Query

Range: -100 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:PEAK:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from a peak magnitude error multi-measurement.

EGPRS LA

Query

Range: -100 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:PEAK[:WORSt]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the peak magnitude error result from a peak magnitude error multi-measurement.

EGPRS LA

Query

Range: -100 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:RMS[:AVERage]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average RMS magnitude error result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:RMS:MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum RMS magnitude error result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:RMS:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum RMS magnitude error result from a multi-measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:RMS:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from an RMS magnitude error measurement.

EGPRS LA

Query

Range: 0 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:MERRor:TRACe:DATA?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the EGPRS Modulation Accuracy Magnitude Error measurement and returns 142 points representing the magnitude error (in percent) for the measured burst. When multi-measurements are turned on, this is the trace data for the last burst measured.

EGPRS LA

Query

Range: -100 % to 100 % and 9.91 E+37 (NAN)

Resolution: 0.01 %

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:OOFFset[:AVERage]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average origin offset result from a multi-measurement.

EGPRS LA

Query

Range: 0 dB to +70 dB and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:OOFFset: MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum origin offset result from a multi-measurement.

EGPRS LA

Query

Range: 0 dB to +70 dB and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:OOFFset:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum origin offset result from a multi-measurement.

EGPRS LA

Query

Range: 0 dB to +70 dB and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:OOFFset:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from an origin offset multi-measurement.

EGPRS LA

Query

Range: 0 dB to +70 dB and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:PEAK:AVERage?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average peak phase error result from a multi-measurement.

EGPRS LA

Query

Range: -180 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:PEAK:MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum peak phase error result from a multi-measurement.

EGPRS LA

Query

Range: -180 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:PEAK:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum peak phase error result from a multi-measurement.

EGPRS LA

Query

Range: -180 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:PEAK:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from an peak phase error multi-measurement.

EGPRS LA

Query

Range: -180 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:PEAK[:WORSt]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the peak phase error result from a peak phase error multi-measurement.

EGPRS LA

Query

Range: -180 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:RMS[:AVERage]?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the average RMS phase error result from a multi-measurement.

EGPRS LA

Query

Range: 0 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:RMS:MAXimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the maximum RMS phase error result from a multi-measurement.

EGPRS LA

Query

Range: 0 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:RMS:MINimum?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the minimum RMS phase error result from a multi-measurement.

EGPRS LA

Query

Range: 0 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:RMS:SDEViation?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the standard deviation result from an RMS phase error multi-measurement.

EGPRS LA

Query

Range: 0 to 180 degrees and 9.91 E+37 (NAN)
Resolution: 0.01 degrees
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:PERRor:TRACe:DATA?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the EGPRS Modulation Accuracy Phase Error measurement and returns 142 points representing the phase error (in percent) for the measured burst. When multi-measurements are turned on, this is the trace data for the last burst measured

EGPRS LA

Query

Range: -180 to +180 degrees and 9.91 E+37 (NAN)

Resolution: 0.01 degrees

Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above

FETCh:EMACcuracy:SYMBol:DATA?

Function

GSM TA This command is not applicable to GSM.

GPRS TA

This command is not applicable to GPRS.

GSM/GPRS LA

This command is not applicable to the GSM/GPRS LA.

EGPRS TA

Queries the EGPRS Modulation Accuracy EVM measurement and returns 148 points representing the demodulated symbols for the burst measured. The first three and last three results in the array correspond to the burst's tail bits.

EGPRS LA

Query

Range: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | -1
where -1 indicates a symbol that could not be demodulated.
Requirements GSM/GPRS/
EGPRS TA

Revision: A.03 and above

GSM/GPRS/ EGPRS LA

Revision: C.03 and above