Last updated: December 3, 2008
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the BCCH Carrier field in the E-OTD Measurement Assistance Data element. This field indicates the absolute RF channel number of the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included. |
|
EGPRS LA | ||
Range: 0 to 1023 Resolution: 1 |
||
Range: 0 to 1023 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:BCHCarrier 556" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the BSIC field in the E-OTD Measurement Assistance Data element. This field indicates the BSIC the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included. |
|
EGPRS LA | ||
Range: 0 to 63 Resolution: 1 |
||
Range: 0 to 63 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:BCICode 8" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA | Includes or excludes the optional Calculation Assistance Data fields from the E-OTD Reference BTS for Assistance Data element for the BTS indicated by the [<n>} mnemonic, where n can range from 1 to 8. You can set the value of these fields using the following commands: CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:FRTDiff CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RNORth CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:REASt | |
EGPRS LA | ||
INCLude|EXCLude | ||
INCL|EXCL | ||
EXCL | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance INCL" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the optional Fine RTD field in the E-OTD Measurement Assistance Data element. This field indicates the fine RTD value between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance command to have it included. |
|
EGPRS LA | ||
Range: 0 to 255 Resolution: 1 bit |
||
Range: 0 to 255 Resolution: 1 bit |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:FRTDiff 220" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA | Includes or excludes the optional Calculation Assistance Data Relative Altitude field from the E-OTD Reference BTS for Assistance Data element for the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RALTitude:VALue command. | |
EGPRS LA | ||
INCLude|EXCLude | ||
INCL|EXCL | ||
EXCL | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance INCL" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Relative Altitude field in the E-OTD Measurement Assistance Data element. This field indicates the altitude of the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) relative to the reference BTS in meters. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RALTitude command to have it included. or excludes the optional E-OTD Measurement Assistance Data element from the Measure Position Request component. |
|
EGPRS LA | ||
Range: -4000 to 4000 Resolution: 1 |
||
Range: -4000 to 4000 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:RALTitude:VALue 2000" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the optional Relative East field in the E-OTD Measurement Assistance Data element. This field indicates the distance between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS in the east-west direction. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance command to have it included. |
|
EGPRS LA | ||
Range: -200000 to 200000 Resolution: 1 |
||
Range: -200000 to 200000 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:REASt -200" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the optional Relative North field in the E-OTD Measurement Assistance Data element. This field indicates the distance between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS in the north-south direction. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance command to have it included. |
|
EGPRS LA | ||
Range: -200000 to 200000 Resolution: 1 |
||
Range: -200000 to 200000 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:RNORth -22000" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Multiframe Offset field in the E-OTD Measurement Assistance Data element. This field indicates the frame offset between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included. |
|
EGPRS LA | ||
Range: 0 to 51 Resolution: 1 |
||
Range: 0 to 51 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:MOFFset 30" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Number of BTS field in the E-OTD Measurement Assistance Data element. This field indicates how many BTS are included in this information element. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included. |
|
EGPRS LA | ||
Range: 1 to 8 Resolution: 1 |
||
Range: 1 to 8 Resolution: 1 |
||
1 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS:NUMBer 3" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Rough RTD field in the E-OTD Measurement Assistance Data element. This field indicates the rough RTD value between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included. |
|
EGPRS LA | ||
Range: 0 to 1250 Resolution: 1 bit |
||
Range: 0 to 1250 Resolution: 1 bit |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:RRTDiff 120" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Time Slot Scheme field in the E-OTD Measurement Assistance Data element. This field indicates the type of transmission scheme used by the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included. |
|
EGPRS LA | ||
Range: 0 to 1 Resolution: 1 0: All timeslots are 156.25 bits long 1: Time slots 0 and 4 are 157 bits long, all other are 156 bits long |
||
Range: 0 to 1 Resolution: 1 |
||
1 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:TSSCheme 0" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA | Includes or excludes the optional Accuracy field from the Positioning Instructions element. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy:VALue command. | |
EGPRS LA | ||
INCLude|EXCLude | ||
INCL|EXCL | ||
EXCL | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy INCL" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Accuracy field in the Positioning Instructions element. This indicates the required accuracy of the latitude and longitude for the location estimate. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy command to have it included. |
|
EGPRS LA | ||
Range: 0 to 127 Resolution: 1 |
||
0 to 127 | ||
127 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy:VALue 55" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA | Includes or excludes the optional Environment Characterization field from the Positioning Instructions element. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter:VALue command. | |
EGPRS LA | ||
INCLude|EXCLude | ||
INCL|EXCL | ||
EXCL | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter INCL" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Environment Characterization field in the Positioning Instructions element. This field provides the MS with information about expected multipath in the current area. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter command to have it included. |
|
EGPRS LA | ||
Range: 0 to 3 0: Heavy multipath 1: Light multipath 2: Not Defined 3: Reserved |
||
0 to 3 | ||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter:VALue 0" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA | Includes or excludes the optional BTS Position field from the E-OTD Reference BTS for Assistance Data element. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter:VALue command. | |
EGPRS LA | ||
INCLude|EXCLude | ||
INCL|EXCL | ||
EXCL | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition INCL" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the Degrees Altitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included. |
|
EGPRS LA | ||
Range: 0 to 32767 Resolution: 1 |
||
Range: 0 to 32767 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:ALTitude 456" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the Direction of Altitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included. |
|
EGPRS LA | ||
ABOVe|BELow | ||
ABOV|BEL | ||
ABOV | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:ALTitude:DIRection BELow" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the Degrees Latitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included. |
|
EGPRS LA | ||
Range: 0 to 2147483647 Resolution: 1 |
||
Range: 0 to 2147483647 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LATitude:DEGRees 4567131" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Includes Sets the Direction of Latitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included. excludes the optional E-OTD Measurement Assistance Data element from the Measure Position Request component. |
|
EGPRS LA | ||
NORTh|SOUTh | ||
NORT|SOUT | ||
NORT | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LATitude:SIGN NORTh" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the Degrees Longitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included. |
|
EGPRS LA | ||
Range: -2147483647 to 2147483647 Resolution: 1 |
||
Range: -2147483647 to 2147483647 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LONGitude:DEGRees 4567131" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the Type of Description for the BTS Position field. The type of description is either "Ellipsoid Point" or "Ellipsoid Point with Altitude". The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included. |
|
EGPRS LA | ||
EPOint|EPALitude EPOint: Ellipsoid Point EPALitude: Ellipsoid Point with Altitude |
||
EPO|EPAL | ||
EPO | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:TYPe EPAL" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA | Includes or excludes the optional Release 98 Extension element from the Measure Position Request component. You can set the value of these fields using the following commands: CALL:PPRocedure:PMEasurement:MPRequest:REL98|RELEASE98:BTS[<n>]:EOTDiff CALL:PPRocedure:PMEasurement:MPRequest:REL98|RELEASE98:BTS[<n>]:EOTDiff:UNCertainty | |
EGPRS LA | ||
INCLude|EXCLude | ||
INCL|EXCL | ||
EXCL | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:REL98 INCL" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Expected OTD field in the Release 98 Extension element. This field indicates the OTD value that the MS is expected to measure between the BTS indicated by the [<n>] mnemonic and the reference BTS. The Release 98 Extension element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:REL98|RELEASE98 command to have it included. |
|
EGPRS LA | ||
Range: 0 to 1250 Resolution: 1 bit |
||
Range: 0 to 1250 Resolution: 1 bit |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:REL98:BTS2:EOTDiff 1010" |
This command is not applicable to the GSM Test Application. | ||
GPRS TA |
This command is not applicable to the GPRS Test Application. |
|
EGPRS TA |
This command is not applicable to the EGPRS Test Application. |
|
GSM/GPRS LA |
Sets the value of the Uncertainty of Expected OTD field in the Release 98 Extension element. This field indicates the uncertainty in the Expected OTD value. The Release 98 Extension element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:REL98|RELEASE98 command to have it included. |
|
EGPRS LA | ||
Range: 0 to 7 Resolution: 1 |
||
Range: 0 to 7 Resolution: 1 |
||
0 | ||
GSM/GPRS/ EGPRS LA | ||
OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:REL98:BTS2:EOTDiff:UNCertainty 5" |