CALL:PPRocedure:PMEasurement:MS

Last updated: January 18, 2010

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	This command queries the Classmark2 data sent by the mobile. Note the Classmark2 data is returned in ASCII format and two ASCII characters represent one octet in the message. The length of classmark2 is 8 ACSII characters.
	EGPRS LA
Query		Range: 0 to 8 ASCII formatted hexadecimal characters.
*RST Setting		" "
Requirements	GSM/GPRS/ EGPRS LA	Revision: H.00.00 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MS:CLASsmark2?"

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	This command queries the Classmark3 data sent by the mobile. Note the Classmark3 data is returned in ASCII format and two ASCII characters represent one octet in the message. The length of classmark3 is 68 ACSII characters.
	EGPRS LA
Query		Range: 0 to 68 ASCII formatted hexadecimal characters.
*RST Setting		" "
Requirements	GSM/GPRS/ EGPRS LA	Revision: H.00.00 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MS:CLASsmark3?"

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Commands the MS to reset the MS positioning stored information by sending a special message (RESET MS POSITIONING STORED INFORMATION) on the DCCH. When receives the message the MS will discard any stored GPS reference time, reference position, and any other aiding data obtained or derived previously.
	EGPRS LA
Requirements	GSM/GPRS/ EGPRS LA	Revision: G.00.00 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MS:RESet"