CALL:PPRocedure:PMEasurement:PRESponse:MINFormation

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation

Last updated: December 3, 2008

GPIB Command Conventions

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries to determine if the optional E-OTD Measurement Information element is included in the Measurement Position Response component from the MS. If this element is not included, none of the values in this element will be available. Therefore, all the queries for the fields on this element will return NAN (Not a number).
EGPRS LA
Query

0 | 1

0: Not included
1: Included

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:BSICode?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Neighbour BSIC field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Neighbour BSIC value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 63 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:BSICode?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:CARRier?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Neighbour BCCH Carrier field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Neighbour BCCH value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 1023 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:CARRier?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:CIDentity?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Neighbour CI field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Neighbour CI value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 65535 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:CIDentity?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:CITYpe?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Cell ID Type field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Cell ID Type value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 5 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:CITYpe?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:LACode?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Neighbour LAC field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Neighbour LAC value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 65535 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:LACode?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:MEASurements:NUMBer?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Number of EOTD Measurements field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Number of EOTD Measurements value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 7 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:MEASurements:NUMBer?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:MEASurements:SDEViation?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Standard Deviation of EOTD Measurements field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Standard Deviation of EOTD Measurements value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 31 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:MEASurements:SDEViation?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:MOFFset?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Neighbour Multiframe Offset field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Neighbour Multiframe Offset value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 51 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:MOFFset?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:NIPResent?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Neighbour Identity Present field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 2 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Neighbour Identity Present value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 1 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:NIPResent?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:NUMBer?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Number of Measured Neighbours field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.
EGPRS LA
Query

Range: 0 to 10 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:NUMBer?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:OTDifference?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the OTD field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a OTD value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 39999 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:OTDifference?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:RINDex?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Request Index field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Request Index value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 16 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:RINDex?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:SIINdex?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the System Info Index field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a System Info Index value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 32 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:SIINDex?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:BTS:TSLot?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Neighbour Time Slot field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.

This query returns a Neighbour Time Slot value for each of the ten neighbouring BTS that can be included in the Measurement Information element. The values are returned the order BTS1, BTS2, BTS3, BTS4, BTS5, BTS6, BTS7, BTS8, BTS9, BTS10. NAN (9.91E+37) will be returned for any neighbour that was not specified in the Measurement Information element.
EGPRS LA
Query

Range: 0 to 3 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:BTS:TSLot?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:FNUMber?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Reference Frame Number field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.
EGPRS LA
Query

Range: 0 to 42431and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:FNUMBer?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:MREFerence:INCLuded?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries to determine if the Measurements of Reference BTS field is included in the E-OTD Measurement Information element of the Measurement Position Response component. If this field is not included, none of the values for this field will be available. Therefore, CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:MREFerence:QUALity? and CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:MREFerence:NUMBer? will all return NAN (Not a number).
EGPRS LA
Query

0 | 1

0: Not included
1: Included

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:MREFerence:INCLuded?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:MREFerence:NUMBer?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Number of Measurements field of the optional Measurements of Reference BTS field for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the Measurements of Reference BTS field is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:MREFerence:INCLuded? to determine if the element is included.
EGPRS LA
Query

Range: 0 to 7 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:MREFerence:NUMBer?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:MREFerence:QUALity?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Reference Quality field of the optional Measurements of Reference BTS field for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the Measurements of Reference BTS field is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:MREFerence:INCLuded? to determine if the element is included.
EGPRS LA
Query

Range: 0 to 31and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:MREFerence:QUALity?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:SRESolution?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Standard Resolution field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.
EGPRS LA
Query

Range: 0 to 3and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:SRESolution?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:TACorrection?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the value of the optional TA Correction field for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the TA Correction field is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:TACorrection:INCLuded? to determine if the element is included.
EGPRS LA
Query

Range: 0 to 960 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:TACorrection?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:TACorrection:INCLuded?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries to determine if the TA Correction field is included in the E-OTD Measurement Information element of the Measurement Position Response component. If this field is not included, the value for this field will not be available. Therefore, CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:TACorrection? will return NAN (Not a number).
EGPRS LA
Query

0 | 1

0: Not included
1: Included

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:TACorrection:INCLuded?"

CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET[<n>]:TSLot?

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Queries the Reference Time Slot field of the optional E-OTD Measurement Information element for the measurement information set indicated by the [<n>] mnemonic, where n can range from 1 to 3. If the E-OTD Measurement Information element is not included, values for this field will not be available. See CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:LIERror:INCLuded? to determine if the element is included.
EGPRS LA
Query

Range: 0 to 3 and 9.91E+37 (NAN)
Resolution: 1

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPRocedure:PMEasurement:PRESponse:MINFormation:SET2:TSLot?"