The following is a list of features applicable to TEDS demodulation:
Standard, channel BW dependent presets for:
Modulation Analysis mode allows quick configuring to analyze each supported slot format and modulation type.
Four channel bandwidths: 25kHz, 50kHz, 100kHz and 150kHz.
Range, triggering, and center frequency selection is available.
ACPAdjacent Channel Power: The power from a modulated communications channel that leaks into an adjacent channel. This leakage is usually specified as a ratio to the power in the main channel, but is sometimes an absolute power. PvT measurements.
TEDS Trace Data
Setting up a TEDS Measurement
Copyright © 2000-2021 Keysight Technologies, Inc.