About Downlink Control Channel Properties (LTE)

Menu Path: MeasSetup > LTE Demod Properties... > Profile tab > Edit Control Params...

The Downlink Control Channel Properties dialog contains tabs that allow you specify control channel parameters. The following tabs and the corresponding channels are shown below:

• Basic tab: P-SSPrimary Synchronization Signal, S-SSSecondary Synchronization Signal, PBCHPhysical Broadcast Channel, PCFICHPhysical Control Format Indicator Channel, C-RSCell-specific RS, PDCCHPhysical Downlink Control Channel, and PHICHPhysical Hybrid ARQAutomatic Repeat Request 1) A distinct unit of data that is carried on an ARQ-enabled connection. Such a unit is assigned a sequence number, and is managed as a distinct entity by the ARQ state machines. Block size is a parameter negotiated during connection establishment. 2) automatic retransmission request - A signal used in digital communications systems used to signal the transmitting device to retransmit a block of data. Indicator Channel
• P-RS/MBMS tab: P-RSPositioning Reference Signal, MBSFN-RSMulticast-Broadcast Single Frequency Network Reference Signal, PMCHPhysical Multicast Channel

See Also

Edit User Mapping...

Profile Tab