CALibration

Function

Starts Burst Mod Offset 1 Calibration for RF source 1.

Query

Range

• 0 = Pass
• -340 = Fail

Requirements

Programming Example

 
OUTPUT 714;"CALibration:BMOFfset?" 
! Initiates Burst Modulator Offset DAC calibration for RF source 1
! and returns a value (0 or -340) after completing the calibration.

Function

Queries the calibration information about Burst Modulation Offset 1.

The query returns 3 comma separated values: Data and Time, Temperature and Pass/Fail.

• Date and Time indicates when the calibraiton is performed.
• Temperature indicates the internal operating temperature when the calibration is performed.
• Pass/Fail indicates whether the calibration is performed successfully.

Query

Range

• Date and Time: "2000-01-01 00:00:00" to "2100-01-01 00:00:00"
• Temperature: -60.0 to 100.0 (°C)
• Pass/Fail: 1| 0

Requirements

Programming Example

 
OUTPUT 714;"CALibration:BMOFfset:INFormation?" 

Function

Queries the calibration information about Digital Average Power.

The query returns 3 comma separated values: Data and Time, Temperature and Pass/Fail.

• Date and Time indicates when the calibraiton is performed.
• Temperature indicates the internal operating temperature when the calibration is performed.
• Pass/Fail indicates whether the calibration is performed successfully.

Query

Range

• Date and Time: "2000-01-01 00:00:00" to "2100-01-01 00:00:00"
• Temperature: -60.0 to 100.0 (°C)
• Pass/Fail: 1| 0

Requirements

Programming Example

 
OUTPUT 714;"CALibration:DAPower:INFormation?" 

Sets/queries the date of the last system calibration done to the test set; not the user calibration date. Returns a comma separated list YYYY,MM,DD in that order.

Sets the system calibration date.

Range

• Year = 0000 to 9999

• Month = 01 to 12

• Day = 01 to 31

Query

Returns the date when system calibration was performed.

Range

• Year = 0000 to 9999

• Month = 1 to 12

• Day = 1 to 31

Programming Example

 
OUTPUT 714;"CALibration:DATE 1999,01,04" 
! Sets the date of the last system calibration year, month and day.

Function

Starts the calibration of the IQ modulator for RF generator 1. See IQ Calibrations .

Query

Range:

• 0 = Pass
• -340 = Fail

Programming Example

 
OUTPUT 714;"CALibration:IQ1?" 
! Performs a calibration of the IQ modulator for RF generator 1 and returns 0 or -340

Function

Queries the calibration information of the IQ modulator for RF generator 1. The command has a parameter string that indicates the name of the TA Partition. The parameter string is selected from "GSM/GPRS", "AMPS/136", "WCDMA", "IS-856" or "IS-2000/IS-95/AMPS".

The query returns 3 comma separated values: Data and Time, Temperature and Pass/Fail.

• Date and Time indicates when the calibraiton is performed.
• Temperature indicates the internal operating temperature when the calibration is performed.
• Pass/Fail indicates whether the calibration is performed successfully.

Query

Range

• Date and Time: "2000-01-01 00:00:00" to "2100-01-01 00:00:00"
• Temperature: -60.0 to 100.0 (°C)
• Pass/Fail: 1| 0

Requirements

Programming Example

 
OUTPUT 714;"CALibration:IQ1:INFormation? 'WCDMA'" 

Function

Starts the calibration of the IQ modulator for RF generator 2. See IQ Calibrations .

Query

Range:

• 0 = Pass
• -340 = Fail

Programming Example

 
OUTPUT 714;"CALibration:IQ2?" 
! Performs a calibration of the IQ modulator for RF generator 2 and returns 0 or -340

Function

Queries the calibration information of the IQ modulator for RF generator 2. The command has a parameter string that indicates the name of the TA Partition. The parameter string is selected from "GSM/GPRS", "AMPS/136", "WCDMA", "IS-856" or "IS-2000/IS-95/AMPS".

The query returns 3 comma separated values: Data and Time, Temperature and Pass/Fail.

• Date and Time indicates when the calibraiton is performed.
• Temperature indicates the internal operating temperature when the calibration is performed.
• Pass/Fail indicates whether the calibration is performed successfully.

Query

Range

• Date and Time: "2000-01-01 00:00:00" to "2100-01-01 00:00:00"
• Temperature: -60.0 to 100.0 (°C)
• Pass/Fail: 1| 0

Requirements

Programming Example

 
OUTPUT 714;"CALibration:IQ2:INFormation? 'WCDMA'" 

Function

Starts the Calibrate Measurements routine.

Query

Range:

• 0: Measurement calibration completed successfully.
• 1: Measurement calibration failed due to temperature drift. Wait for temperature to stabilize.
• 2: Measurement calibration failed due to oven out of range.
• 3: Measurement calibration failed due to loopback switch problem.
• 4: Measurement calibration failed due to under range condition.
• 5: Measurement calibration failed due to over range condition.
• 6: Measurement calibration failed due to correlation problem.
• -340: Measurement calibration failed. This is a SCPI defined value indicating an unexpected case.

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALIBRATION:MEASUREMENTS?"
! Starts the measurement calibration and returns a value indicating success or failure..

Function

Starts the Spectrum Monitor Calibration routine.

Query

Range:

• 0 (Spectrum Monitor calibration completed successfully)
• 1 (Spectrum Monitor calibration failed due to temperature drift. Wait for temperature to stabilize)
• 2 (Spectrum Monitor calibration failed due to oven out of range)
• 3 (Spectrum Monitor calibration failed due to loopback switch problem)
• 4 (Spectrum Monitor calibration failed due to under range condition)
• 5 (Spectrum Monitor calibration failed due to over range condition)
• 6 (Spectrum Monitor calibration failed due to correlation problem)
• 7 (Spectrum Monitor calibration failed due to source level problem)
• 8 (Spectrum Monitor calibration failed due to IF filter coefficient problem)
• 9 (Spectrum Monitor calibration failed due to IF frequency response problem)
• 10 (Spectrum Monitor calibration failed due to waveform quality problem)
• -340 (Spectrum Monitor calibration failed)

Programming Example

 
OUTPUT 714;"CALibration:SMONitor?"
! Starts the spectrum monitor calibration and returns a value indicating success or failure.

Function

Queries the calibration information about Spectrum Monitor. The command has a parameter string that indicates the name of the TA Partition. The parameter string is selected from "GSM/GPRS", "AMPS/136", "WCDMA", "IS-856" or "IS-2000/IS-95/AMPS".

The query returns 3 comma separated values: Data and Time, Temperature and Pass/Fail.

• Date and Time indicates when the calibraiton is performed.
• Temperature indicates the internal operating temperature when the calibration is performed.
• Pass/Fail indicates whether the calibration is performed successfully.

Query

Range

• Date and Time: "2000-01-01 00:00:00" to "2100-01-01 00:00:00"
• Temperature: -60.0 to 100.0 (°C)
• Pass/Fail: 1| 0

Requirements

Programming Example

 
OUTPUT 714;"CALibration:SMONitor:INFormation? 'WCDMA'"