CALL:ANTenna

 Function

 Queries the desired sum of the power of all code channels transmitted on antenna 1 of the serving cell.

 See Cell Power and AWGN Power for more information about desired versus current power levels.

 Query

 Range:

 
• -165 dBm/3.84 MHz to +37 dBm/3.84 MHz, NAN (this is the range of settings accepted, see Cell Power, AWGN Power and Total RF Power Ranges for the actual hardware range of the source)
•  9.91 E+37 (NAN) is returned if CALL:ANTenna1:POWer:STATe? is OFF

 Resolution: 0.01 dB

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna1:POWer:AMPLitude?"

 Function

 Queries the On/Off state of the CALL:ANTenna1:POWer[:AMPLitude]? .

 Query

 Range: 1|ON|0|OFF

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna1:POWer:STATe?

 Function

 The setting form of this command performs two functions: (1) sets the CALL:ANTenna2:CONNected:CPIChannel:LEVel:HSDPa and (2) sets the CALL:ANTenna2:CONNected:CPIChannel:STATe:HSDPa to on .

 The query form of this command returns the CALL:ANTenna2:CONNected:CPIChannel:LEVel:HSDPa  .

 Setting

 Range: -20.00 dB to 0 dB

 Resolution: 0.01dB

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SLEVel:HSDPa -13DB"
! Sets the power offset of the P-CPICH transmitted on antenna 2
 to -13 dB and turns its state on.

 Function

 The setting form of this command performs two functions: (1) sets the CALL:ANTenna2:CONNected:CPIChannel:LEVel:HSPA and (2) sets the CALL:ANTenna2:CONNected:CPIChannel:STATe:HSPA to on .

 The query form of this command returns the CALL:ANTenna2:CONNected:CPIChannel:LEVel:HSPA  .

 Setting

 Range: -20.00 dB to 0 dB

 Resolution: 0.01dB

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SLEVel:HSPA -13DB"
! Sets the power offset of the P-CPICH transmitted on antenna 2
 to -13 dB and turns its state on.

 Function

 Sets/queries the HSDPA Antenna 2 Connected P-CPICH (Desired Level) .

 Setting

 Range: -20.00 to 0dB

 Resolution: 0.01dB

 Increment: 0.1dB

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:LEVel:HSDPa -13DB"

 
!Sets the power offset of the P-CPICH transmitted on antenna 2 to -13 dB when P-CPICH is transmitted on antenna 2.

 Function

 Sets/queries the HSPA Antenna 2 Connected P-CPICH (Desired Level) .

 Setting

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:LEVel:HSPa -13DB"

 
!Sets the power offset of the P-CPICH transmitted on antenna 2 to -13 dB.

 Function

 The setting form of this command performs two functions: (1) sets the CALL:ANTenna2:CONNected:CPIChannel:SECondary:LEVel:HSDPa and (2) sets the CALL:ANTenna2:CONNected:CPIChannel:SECondary:STATe:HSDPa to on .

 The query form of this command returns the CALL:ANTenna2:CONNected:CPIChannel:SECondary:LEVel:HSDPa  .

 Setting

 Range: -20.00 dB to 0 dB

 Resolution: 0.01dB

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SECondary:SLEVel:HSDPa -13DB"
! Sets the power offset of the S-CPICH transmitted on antenna 2
 to -13 dB and turns its state on.

 Function

 The setting form of this command performs two functions: (1) sets the CALL:ANTenna2:CONNected:CPIChannel:SECondary:LEVel:HSPA and (2) sets the CALL:ANTenna2:CONNected:CPIChannel:SECondary:STATe:HSPA to on .

 The query form of this command returns the CALL:ANTenna2:CONNected:CPIChannel:SECondary:LEVel:HSPA  .

 Setting

 Range: -20.00 dB to 0 dB

 Resolution: 0.01dB

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SECondary:SLEVel:HSPA -13DB"
! Sets the power offset of the S-CPICH transmitted on antenna 2
 to -13 dB and turns its state on.

 Function

 Sets/queries the HSDPA Antenna 2 Connected S-CPICH (Desired Level) .

 Setting

 Range: -20.00 to 0dB

 Resolution: 0.01dB

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SECondary:LEVel:HSDPa -13DB" 

 
!Sets the power offset of the S-CPICH transmitted on antenna 2 to -13 dB when S-CPICH is transmitted on antenna 2

 Function

 Sets/queries the HSPA Antenna 2 Connected S-CPICH (Desired Level) .

 Setting

 Query

 Same as setting

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SECondary:LEVel:HSPA -13DB" 

 
!Sets the power offset of the S-CPICH transmitted on antenna 2 to -13 dB when S-CPICH is transmitted on antenna 2.

 Function

 Sets/queries the On/Off state of the HSDPA Antenna 2 Connected S-CPICH (Desired Level) .

 Setting

 Range: 1|ON|0|OFF

 Query

 Range: 1|0

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SECondary:STATe:HSDPa ON" 

 
!Sets the power offset state of the S-CPICH transmitted on antenna 2 to on.

 Function

 Sets/queries the HSPA Antenna 2 Connected S-CPICH (Desired Level) .

 Setting

 Range: 1|ON|OFF

 Query

 Range: 1|0

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:SECondary:STATe:HSPA ON"

 
!Sets the power offset state of the S-CPICH transmitted on antenna 2 to On.

 Function

 Sets/queries the on/off state of the HSDPA Antenna 2 Connected P-CPICH (Desired Level) .

 Setting

 Range: 1|ON|0|OFF

 Query

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:STATe:HSDPa ON" 

 
!Sets the antenna 2 P-CPICH power to On.

 Function

 Sets/queries the HSPA Antenna 2 Connected P-CPICH (Desired Level) .

 Setting

 Query

 Range: 1|0

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

OUTPUT 714;"CALL:ANTenna2:CONNected:CPIChannel:STATe:HSPA ON" 

 
!Sets the antenna 2 P-CPICH power to On when P-CPICH is transmitted on antenna 2.

 Function

 Sets/queries the HSPA Antenna 2 Connected S-CPICH (Desired Level) .

 This setting can only be changed call/data status is Idle.

 Setting

 Range: 1|ON|0|OFF

 Query

 Range: 1|0

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:CPIChannel:SECondary:CONFig:STATe ON" 

 
!S-CPICH will be transmitted on antenna 2.

 Function

 Sets/queries the HSDPA MIMO Antenna 2 Pilot Configuration .

 This parameter can only be set while the Call/Data Status is Idle .

 Setting

 Range: PCPichannel|SCPichannel

 Query

 Same as setting

 *RST Setting

 Requirements

 Test Application Revision: A.20.00 and above, with the required feature license

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:PILot:CONFig PCPichannel"

 
!Sets the pilot channel of antenna 2 to P-CPICH.

 Function

 Queries the desired sum of the power of all code channels transmitted on antenna 2 of the serving cell.

 See Cell Power and AWGN Power for more information about desired versus current power levels.

 Query

 Range:

 
• -165 dBm/3.84 MHz to +37 dBm/3.84 MHz, NAN (this is the range of settings accepted, see Cell Power, AWGN Power and Total RF Power Ranges for the actual hardware range of the source)
•  9.91 E+37 (NAN) is returned if CALL:ANTenna2:POWer:STATe? is OFF

 Resolution: 0.01 dB

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:POWer:AMPLitude?"

 Function

 Queries the On/Off state of the CALL:ANTenna2:POWer[:AMPLitude]? .

 Query

 Range: 1|ON|0|OFF

 *RST Setting

 Requirements

 Lab Application Revision: I.00.00 and above

 Programming Example

 
OUTPUT 714;"CALL:ANTenna2:POWer:STATe?