Call Limit Mode

Call Limit Mode

Last updated: July 22, 2008

Call limit mode can be enabled (turned on) or disabled (turned off).

When call limit mode is on, the test set will not respond to any access probes from the access terminal (during events such as opening a session or connection, keep alive mechanisms etc.). This forces the access terminal to repeatedly send access probes.

   
IMPORTANT
You can not open a session when call limit mode is on.
   

   
IMPORTANT
You can not change a parameter which is configured during the Session Negotiate State when a session is open and call limit mode is on.
   

   
NOTE
When the test set is in a configuration of Multi-carrier Multi-unit (MCMU) , you can not change the call limit mode when the Local Testset Configuration is Auxiliary.