Last updated: November 12, 2008
This query returns up to three concatenated mobile station reported frequency band classes (frequency bands supported by the mobile station). Each band that is included in the returned string is right-justified within an 8-character slot. Each 8-character slot is followed by a comma and a space until the last band is sent. The last band in the string will not have an appended comma and a space. The return values for CALL:MS:REPorted:OPERating:MODE? and CALL:MS:REPorted:EIRPower[:MAXimum]? will consist of an operating mode and a maximum EIRP for each band returned by this command. Unless the Status Request Query is set to "OFF" by the command , each time a new mobile station registers with the test set, the test set will have the mobile station report band classes, mobile station reported operating mode for each band class, and mobile station reported max EIRP (if the operating mode is CDMA) for each band class. These results are referred to as Status Request Information. |
|
Range: US Cell, Jpn Cell, Kor PCS, US PCS, IMT-2000, NMT-450, Cell 700, Sec 800, US 1900, AWS, PAMR 400, PAMR 800, PSAF 700, Lower 700, null |
|
Null | |
OUTPUT 714;"CALL:MS:REPORTED:BCLASS?" !when sent to a mobile station supporting US cellular and US PCS bands, returns the string: !"<sp>US<sp>Cell,<sp><sp><sp>US<sp>PCS". !Note: string is 16 characters (8 per band) plus a comma and space separating the two bands. |
Queries station class mark bandwidth support for AMPS mobile. |
|
OUTPUT 714;"CALL:MS:REPORTED:BWTYPE?" |